Epoxy coated warehouse floor

Epoxy Car Park Flooring for Strata Buildings in Sydney from Evo Epoxy Flooring

A basement car park in an apartment block gets driven on every day by every resident, and bare concrete does not cope well with that. It dusts, it stains where cars drip oil, and the painted bay lines wear off until nobody is sure where one space ends. Epoxy car park flooring puts a sealed, coloured coating over the existing slab, with the line marking laid on top, so the floor is easier to clean and the bays stay readable. This guide is written for strata managers, building managers and owners corporation committees in Sydney who are weighing up an epoxy coating for a strata car park.

What epoxy car park flooring does for a strata building

An epoxy car park floor is a coating bonded to the concrete you already have. It is not a new slab. The concrete is ground back to a clean, open surface, then a primer, an epoxy base coat and a sealer go down, and the coating grips into the ground concrete so it becomes part of the floor rather than a layer sitting loose on top.

For a strata building, the coating changes how the car park looks and how it is cleaned:

  • Oil, coolant and brake fluid sit on the surface and wipe up, instead of soaking into the concrete and leaving a stain under every bay.
  • The slab stops shedding dust onto the cars parked on it.
  • A mop or a scrubber goes over a sealed surface easily, so cleaners spend less time fighting the floor.
  • Bay lines, walkways and keep clear zones are marked on the new coating, so the layout is clear again.

Bin rooms, lift lobbies and common areas in the same building can be coated as well.

Industrial Line Marking Warehouse

Why strata car park concrete wears out

A basement car park takes constant tyre traffic. Cars park in the same bays and drip in the same places, year after year. Bare concrete is porous, so spills go into it and dust comes out of it, and no amount of scrubbing gets a stain back out once it has soaked in.

The result is a surface that is stained, dusty and patchy, with line marking worn down along the wheel paths. An epoxy coating deals with that surface. It goes over the concrete that is already there and does not replace it.

How we prepare a strata car park floor before the epoxy coating

Preparation decides how long an epoxy car park floor lasts. A car park that has been in use for years is harder to prepare than a fresh slab, because of what is already in the concrete. Preparing a strata car park floor covers these steps:

  1. Moisture assessment: we check the slab to see whether a moisture barrier is needed, because moisture rising through concrete will lift a sealed coating.
  2. Diamond grinding: the surfaces and edges are ground back to clean, open concrete with vacuum extraction, so the primer has something to key into.
  3. Oil spots: oil that has soaked into the slab is drawn out and the contaminated surface is taken off, because a coating will not bond to concrete full of oil.
  4. Old coatings: any old paint or coating that is failing comes up rather than being coated over.
  5. Cracks and gaps: cracks, holes and spalled patches are filled and made good before anything is coated.

Once the slab is ready, one coat of epoxy primer and one coat of epoxy base coat go down, followed by the sealer. If you want to know more about why grinding comes first, our guide to concrete grinding before epoxy explains what it fixes and what a quote should say about it.

Choosing the sealer and grip for an epoxy car park floor

The sealer is the coat that cars actually drive on, and there are two main types. Polyurethane is our standard sealer on home floors. It prevents discolouration, protects the floor from UV and adds a layer of hardness. Polyaspartic is the heavier duty option. It is more chemical resistant and stands up to harder knocks, and we mainly use it on commercial floors and floors with higher traffic. On a strata car park, we choose the sealer at the quote, once we have seen the traffic and what gets spilled on the floor.

Grip matters in a car park because people walk across it to the lifts, often with wet shoes on a rainy day. An anti-slip additive can be mixed into the sealer, and a quartz additive is available for areas that need slip certification. Tell us at the quote if any part of the car park has to be certified, because it changes what goes into the sealer. More texture also holds more dirt and takes more effort to clean, so we match the level of grip to each area. A ramp needs more grip than a flat parking bay.

Colour is chosen on site. We bring samples out and look at them under the car park lighting, because a colour that looks right on a small chip can read quite differently across a whole basement. All 76 colours are on our epoxy flooring colours page.

Line marking on an epoxy car park floor

Line marking goes straight onto the finished coating as part of the same work, so the building does not need to book a second trade. Parking bays, pedestrian walkways and keep clear zones around doors and switchboards can all be set out once the coating is down. Our preferred product for line marking is EPO100L Line Marking Tinted Epoxy from All Purpose Coatings, the company that makes our preferred floor coatings.

If the existing layout has never worked well for the building, the new line marking can set it out differently. Bring the committee’s plan to the quote and we will talk through how the new line marking can be set out.

Coating a strata car park while residents still need to park

Residents still need somewhere to park while the floor is coated, so the work is staged. One section of the car park is closed and coated while the rest keeps running, and then we move to the next section. We give you real dates once we have seen the site, so the building manager can tell residents which bays close and when.

Our working figure is 72 hours before a coated floor goes back into normal use, because the coating keeps hardening after it feels dry underfoot. That figure is what each section plan is built around.

Diamond grinding is loud. In a residential building, the preparation runs during the day because people live there, and we plan it with the building manager before anything starts so residents know what is happening and when. We keep dust and noise to manageable levels, and the work is planned around local noise restrictions and the site’s OHS requirements. Commercial buildings set their own rules for preparation times, and we quote around those hours.

How a strata car park epoxy quote works

Strata work goes through building managers and committees rather than a single owner, so the quote has to be clear enough to put in front of a meeting. Car parks are quoted on site, because the area and the condition of the slab decide the price. The on-site quote is free, we come to you rather than pricing off photos, and the price is fixed in writing before anything is booked.

The things that change a car park quote are the same things that change any epoxy floor quote: moisture in the concrete, the number of cracks and gaps to fill, and any existing paint on the floor, which needs another round of grinding to remove. The general breakdown is on our epoxy flooring cost page. Our epoxy floors are backed by a written 7-year product warranty.

For other floors in a working building, such as retail back of house or a commercial kitchen, see our commercial epoxy flooring page. If your building is on the north shore, our epoxy flooring in Chatswood page covers the apartment buildings we coat around Chatswood.

Frequently asked questions about epoxy car park flooring

Can you coat a strata car park that already has oil stains and old paint on it?

Yes. Oil that has soaked into the slab is drawn out and the contaminated surface is ground off, because a coating will not bond to concrete full of oil. Old paint or coatings that are failing come up rather than being coated over. Existing paint adds another round of grinding, so tell us about it at the quote.

Do residents have to move their cars for the whole car park coating?

No. The car park is coated in sections, so part of it stays open while another part is closed. Each section needs about 72 hours before cars go back on it, because the coating keeps hardening after it feels dry. We give the building manager real dates for each section once we have seen the site.

When do you do the noisy preparation in an apartment building?

The preparation runs during the day. Diamond grinding is loud and people live in the building, so we plan the grinding with the building manager before anything starts. We keep dust and noise to manageable levels and plan the work around local noise restrictions and the site’s OHS requirements. Commercial buildings set their own preparation hours.

Can you do the car park line marking as well?

Yes. Line marking goes onto the finished coating as part of the same work, so there is no second trade to book. Parking bays, pedestrian walkways and keep clear zones can all be marked. If the committee wants a different layout, bring the plan to the quote.

How is a strata car park epoxy floor priced?

Car parks are quoted on site, because the area and the condition of the slab decide the price. Moisture in the concrete, cracks to fill and old paint to remove all change the figure. The on-site quote is free and the price is fixed in writing before anything is booked.

Book a free on-site quote for your strata car park

If your building’s car park is dusty, stained or hard to navigate, Kian will come out, look at the slab, check it for moisture and talk through the layout with the building manager or committee. You will get a fixed written price and real dates for each section. Call Evo Epoxy Flooring on 0468 333 881 or send us your details through our contact page.

More From The Blog

Concrete Grinding Before Epoxy: Why Skipping It Voids Your Floor
September 16, 2026

Concrete Grinding Before Epoxy: Why Skipping It Voids Your Floor

Epoxy does not stick to concrete, it sticks into it. This post explains what grinding does, why acid etching is not a…

Get A Free Quote

Tell us about your floor and we will come back fast with an upfront price. Servicing garages, warehouses and homes right across NSW.

Evo Epoxy — Get a Free Quote